Appendices > Appendix E - SOAPAMCP Process Messages

This appendix describes the SOAPAMCP process messages. Message numbers are grouped into the following ranges:

 

 

 

 

SOAPAMCP 1922 Unable to open CDF file file-name: reason-for-failure.

 

Cause. The CDF file could not be opened. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1923 Unable to load CDF file file-name: reason-for-failure.

 

Cause. The CDF file was opened but could not be loaded. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1925 The certificate file file-name does not contain a valid client certificate or the supplied pass phrase is not correct: reason-for-failure.

 

Cause. The certificate file could not be loaded. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1929 Invalid syntax for the -messagedump option. Valid message dump values are 'soap', 'ipm', and 'raw'.

 

Cause. The -messagedump option was incorrectly specified.

 

Effect. The SOAPAMCP process stops.

 

Recovery. Correct the -messagedump option and restart the process.

 

 

SOAPAMCP 1931 Unable to load the product license from license-source: reason-for-failure.

 

Cause. There is a problem with the license file. The reason-for-failure describes the failure.

 

Effect. The SOAPAMCP process starts but will not process web service requests until a valid license is installed.

 

Recovery. Install a valid license.

 

 

SOAPAMCP 1922 Unable to open CDF file file-name: reason-for-failure.

 

Cause. The CDF file could not be opened. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1924 The option-name option requires a valid credentials string.

 

Cause. The option-name option was specified but no credentials were supplied. The option requires a credentials string or file name.

 

Effect. The SOAPAMCP process stops.

 

Recovery. If you wish to use a HTTP authentication correct the option specification and restart the SOAPAMCP process.

 

 

SOAPAMCP 1925 Unable to load credentials: reason-for-failure.

 

Cause. The credentials specified in the -sslclientcert or -httpauth option could not be loaded. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1926 The specified trusted root file file-name does not exist.",

 

Cause. The file specified with the -sslcarootfile option does not exist.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Correct the file specification and restart SOAPAMCP.

 

 

SOAPAMCP 1926 The specified local CA file file-name does not exist.",

 

Cause. The file specified with the -sslcalocalfile option does not exist.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Correct the file specification and restart SOAPAMCP.

 

 

SOAPAMCP 1927 SSL Initialization error: reason-for-failure.

 

Cause. An error occurred while initialization the SSL subsystem or loading the client certificate.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Correct the issue described in reason-for-failure and restart SOAPAMCP.

 

 

SOAPAMCP 1938 The -sslclientcert option requires a valid certificate file name and associated credentials.

 

Cause. The -sslclientcert option was specified but no file name or credentials were supplied.

 

Effect. The SOAPAMCP process continues to run but no client certificate will be loaded.

 

Recovery. If you wish to use a client certificate correct the option specification and restart the SOAPAMCP process.

 

 

SOAPAMCP 1940 The service location URL is not valid.

 

Cause. The URL specified for the service endpoint is not valid. This URL may be specified in the CDF or with the -location startup option.

 

Effect. The SOAPAMCP process stops.

 

Recovery. Correct the URL specification and restart SOAPAMCP.

 

 

SOAPAMCP 1941 Host name host-name could not be resolved to an IP address.

 

Cause. The host name specified in the service location URL could not be resolved to an IP address. This URL may be specified in the CDF or with the -location startup option.

 

Effect. The SOAPAMCP process stops.

 

Recovery. Correct the URL specification and restart SOAPAMCP. If the URL is correct then resolve the name resolution problem and restart SOAPAMCP.

 

 

SOAPAMCP 1944 The required -cdf option was not supplied.

 

Cause. The -cdf option is a required startup parameter and it was not supplied.

 

Effect. The SOAPAMCP process stops.

 

Recovery. Restart the SOAPAMCP process and supply a valid -cdf option.

 

 

SOAPAMCP 1945 Unable to open policy file file-name: reason-for-failure.

 

Cause. The web service policy file could not be opened. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 1946 Unable to load policy file file-name: reason-for-failure.

 

Cause. The policy file was opened but could not be loaded. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

SOAPAMCP 1947 Invalid syntax for the -messagedumpfilter option.

 

Cause. The -messagedumpfilter option was incorrectly specified.

 

Effect. The SOAPAMCP process stops.

 

Recovery. Correct the -messagedumpfilter option and restart the process.

 

 

SOAPAMCP 1948 Unable to open certificate file file-name: reason-for-failure.

 

Cause. The certfiicate file could not be opened. The reason-for-failure describes the failure.

 

Effect.  The SOAPAMCP process stops.

 

Recovery. Resolve the cause of the failure and restart the SOAPAMCP process.

 

 

SOAPAMCP 2800 Warning: The installed license expires on date.

 

Cause. The installed license will expire on the specified date. This message is generated once per day when the license will expire in less than 30 days.

 

Effect. When the license expires the server will no longer process web service requests.

 

Recovery. Renew the license.

 

 

SOAPAMCP 3100 NuWave Technologies SOAP/AM  Client version.

 

Cause. This message is generated at SOAPAMCP process startup and displays the product version.

 

Effect. This message in informational.

 

Recovery. None

 

 

SOAPAMCP 3102 Starting in CPU cpu-number with options: startup-options-list.

 

Cause. This message is generated at SOAPAMCP process startup and displays the startup CPU and options.

 

Effect. This message in informational.

 

Recovery. None

 

SOAPAMCP 3106 Stopping.

 

Cause. This message is displayed when the SOAPAMCP process begins the shutdown process.

 

Effect. This message in informational.

 

Recovery. None

 

SOAPAMCP 3107 Stopped.

 

Cause. This message is displayed when the SOAPAMCP process stops.

 

Effect. This message in informational.

 

Recovery. None

 

SOAPAMCP 3112 Using TCPIP process process-name, specified by < options | DEFINE | default >.

 

Cause. This message is generated at SOAPAMCP process startup and displays the TCP/IP process name being used and how the process name was determined.

 

Effect. This message in informational.

 

Recovery. None